返回首页 | 加入收藏 | 关于我们 | 联系我们

欢迎光临四川九州体育娱乐官网!

专注升降机械多年 做客户放心厂家

全国服务热线139-8227-2262
028-89994656
九州体育娱乐升降机械
当前位置:首页 » 升降平台试机流程是咋样的?

升降平台试机流程是咋样的?

文章出处:www.cddmjx.com 责任编辑:admin 人气:1301 发表时间:2017-11-29 19:47:09

1.按图纸要求做好地坑、预埋件与地坑地面平齐,地坑图厂家会根据每个产品的不同设计不同的图纸给客户。 Well, the pit pit ground and embedded parts according to the requirements of the drawings, figure pit manufacturer will according to the different design of each product drawings to different customers.

2.调整wwwju11上行程:将平台升起,升到指定位置,确认完好,安装限位开关。Adjust the trip on the Chengdu landing platform: the platform rises, or to the designated location, to be confirmed in good condition, the installation of the limit switch.

3.将成都升降机导轨轮轮焊接于平台两侧(四个角的内侧)。再将导轨(槽钢)垂直于平台两侧的导轨轮位置,将导轨轮(按照导轨轮照片上的方法)放置于导轨内,使导轨轮在导轨内可以滑动自如。Welding the Chengdu elevator guide rail wheel on both sides of the platform (inside the four corners). Then the guide rail is perpendicular to the guide rail wheel on both sides of the platform, and the guide rail wheel (according to the method of the guide rail wheel) is placed in the guide rail, so that the guide rail can slide freely in the guide rail.

4.接好电源,启动wwwju11设备,检查导轨与主机配合是否完好。Connect the power supply, start the Chengdu lifting platform equipment, check the guide rail and the host is in good condition.

5.寻找专业电工安装控制箱,把线路整理好,按照wwwju11厂家的指导连接好线路。 Find a professional electrician to install the control box, the line finishing good, in accordance with the guidance of the Chengdu elevator manufacturers to connect a good line.

6.用膨胀螺丝将铁板(铁板大小能放开导轨就可)固定在放置导轨的底部位置,然后将导轨焊接在铁板上,同时将顶部连接,使其上下固定牢固。将货梯台面放置于地坑内,将平台调整到台面与地面水平处,将平台底部与预埋件焊接牢固。With the iron (iron size expansion screws can open can guide) is fixed at the bottom position of the guide rail, and the rail welding in the plate, while the top connection, the upper and lower fixed firmly. The elevator table into the pit, will be adjusted to the table and the ground level of the platform, the platform bottom and embedded parts welded firmly.

7.试机:成都升降机升降过程中,导轨轮须在导轨内平稳滑动,使平台升降平稳。Test machine: Chengdu lift in the course of the lift, the guide rail in the guide rail in a smooth slide, so that stable platform.

8.成都升降机验收:试机完毕后,清理好现场,排除其他杂物,以备投入使用。Chengdu elevator acceptance: after the test machine is completed, clean up the scene, excluding other debris, in order to prepare for the use of.

此文关键字:wwwju11